DIY Home Improvement Tips » magni work http://www.su-casa.org Sun, 29 Jan 2012 03:21:20 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 Magni Work – Home Made Electric Generator http://www.su-casa.org/magni-work-home-made-electric-generator.html http://www.su-casa.org/magni-work-home-made-electric-generator.html#comments Sat, 19 Jun 2010 08:57:53 +0000 SuCasa http://www.su-casa.org/magni-work-home-made-electric-generator.html 3154924046 a1b26f8554 m Magni Work Home Made Electric Generator

Do you want to build your own home made electric generator?

Click Here For Magni Work Instant Access Now!

For this project, you will need the following materials: 4 – 1cm x 2cm x 5cm ceramic magnet; 1 – 30-gauge magnet wire, 200ft; 1 – miniature incandescent lamp (light bulb), 1.5V/25mA; 1 – cardboard strip (or Plexiglas or thin wood), 8cm x 30cm; 1 – large nail, at least 8cm long; sandpaper to strip the wires; and tape to secure wires.

First, you have to create the open-ended box. After creating the box, use the nail to carefully poke a hole perfectly straight through the center of the box. Pull the nail out and use it to widen all the holes slightly, so when you put the nail back through, it will be a bit loose and able to spin. Pick the spool of 30-gauge magnet wire (the thinnest … Click here to read more

]]> 3154924046 a1b26f8554 m Magni Work Home Made Electric Generator

Do you want to build your own home made electric generator?

Click Here For Magni Work Instant Access Now!

For this project, you will need the following materials: 4 – 1cm x 2cm x 5cm ceramic magnet; 1 – 30-gauge magnet wire, 200ft; 1 – miniature incandescent lamp (light bulb), 1.5V/25mA; 1 – cardboard strip (or Plexiglas or thin wood), 8cm x 30cm; 1 – large nail, at least 8cm long; sandpaper to strip the wires; and tape to secure wires.

First, you have to create the open-ended box. After creating the box, use the nail to carefully poke a hole perfectly straight through the center of the box. Pull the nail out and use it to widen all the holes slightly, so when you put the nail back through, it will be a bit loose and able to spin. Pick the spool of 30-gauge magnet wire (the thinnest wire) from the kit of spools. Tape one end of the magnet wire to the side of the box, and wind the entire spool of wire horizontally onto the box

Pull the taped end of the wire out, and tape down both of the wires about 10cm from the ends so the coil doesn’t unwind. Use the sandpaper to scrape the thin coating off 2cm of the wire ends. Stick the four magnets together face to face in two pairs, and then stick the two pairs on either side of the nail (inside the box) so they grab the nail. Push the magnets around until they are somewhat balanced and even, then spin the nail and see if they turn freely.

Twist one of the scraped ends of generator wire securely around the silver tip of one wire from the small light bulb, and the end of the other generator wire around the tip of the other light bulb wire. To test your home made electric generator, spin the nail or magnet combination really fast; the bulb should light dimly.

Click Here For Magni Work Instant Access Now!

Watch the video related to DIY Home Improvement

Help answer the question about DIY Home Improvement

What is your favorite home improvement show ?
I love to watch Rock Solid on DIY. The guys are so much fun.

Related Post

]]> http://www.su-casa.org/magni-work-home-made-electric-generator.html/feed 18