DIY Home Improvement Tips » electrical http://www.su-casa.org Sun, 29 Jan 2012 03:21:20 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 Magni Work – Home Made Electric Generator http://www.su-casa.org/magni-work-home-made-electric-generator.html http://www.su-casa.org/magni-work-home-made-electric-generator.html#comments Sat, 19 Jun 2010 08:57:53 +0000 SuCasa http://www.su-casa.org/magni-work-home-made-electric-generator.html 3154924046 a1b26f8554 m Magni Work Home Made Electric Generator

Do you want to build your own home made electric generator?

Click Here For Magni Work Instant Access Now!

For this project, you will need the following materials: 4 – 1cm x 2cm x 5cm ceramic magnet; 1 – 30-gauge magnet wire, 200ft; 1 – miniature incandescent lamp (light bulb), 1.5V/25mA; 1 – cardboard strip (or Plexiglas or thin wood), 8cm x 30cm; 1 – large nail, at least 8cm long; sandpaper to strip the wires; and tape to secure wires.

First, you have to create the open-ended box. After creating the box, use the nail to carefully poke a hole perfectly straight through the center of the box. Pull the nail out and use it to widen all the holes slightly, so when you put the nail back through, it will be a bit loose and able to spin. Pick the spool of 30-gauge magnet wire (the thinnest … Click here to read more

]]> 3154924046 a1b26f8554 m Magni Work Home Made Electric Generator

Do you want to build your own home made electric generator?

Click Here For Magni Work Instant Access Now!

For this project, you will need the following materials: 4 – 1cm x 2cm x 5cm ceramic magnet; 1 – 30-gauge magnet wire, 200ft; 1 – miniature incandescent lamp (light bulb), 1.5V/25mA; 1 – cardboard strip (or Plexiglas or thin wood), 8cm x 30cm; 1 – large nail, at least 8cm long; sandpaper to strip the wires; and tape to secure wires.

First, you have to create the open-ended box. After creating the box, use the nail to carefully poke a hole perfectly straight through the center of the box. Pull the nail out and use it to widen all the holes slightly, so when you put the nail back through, it will be a bit loose and able to spin. Pick the spool of 30-gauge magnet wire (the thinnest wire) from the kit of spools. Tape one end of the magnet wire to the side of the box, and wind the entire spool of wire horizontally onto the box

Pull the taped end of the wire out, and tape down both of the wires about 10cm from the ends so the coil doesn’t unwind. Use the sandpaper to scrape the thin coating off 2cm of the wire ends. Stick the four magnets together face to face in two pairs, and then stick the two pairs on either side of the nail (inside the box) so they grab the nail. Push the magnets around until they are somewhat balanced and even, then spin the nail and see if they turn freely.

Twist one of the scraped ends of generator wire securely around the silver tip of one wire from the small light bulb, and the end of the other generator wire around the tip of the other light bulb wire. To test your home made electric generator, spin the nail or magnet combination really fast; the bulb should light dimly.

Click Here For Magni Work Instant Access Now!

Watch the video related to DIY Home Improvement

Help answer the question about DIY Home Improvement

What is your favorite home improvement show ?
I love to watch Rock Solid on DIY. The guys are so much fun.

Related Post

]]> http://www.su-casa.org/magni-work-home-made-electric-generator.html/feed 18 Garage Door Repair http://www.su-casa.org/garage-door-repair.html http://www.su-casa.org/garage-door-repair.html#comments Fri, 17 Jul 2009 09:36:45 +0000 SuCasa http://www.su-casa.org/?p=40 One of the easiest shower remodeling projects to upgrade existing shower curtain or door. Installing a new shower curtain is a fairly simple and can be done by anyone. To further enhance the look of your bathroom you can also consider adding (or upgrading) shower doors.

Shower Curtains – Install shower curtain rod and another simple DIY home repair project. If you currently do not have a shower curtain or if you replace the existing shower curtain rod measure the distance between the walls at a height where the rod will be placed. Home Repair Centers as well as a large number of department stores usually have enough selection to choose from. Select the correct length of the rod along with the selected style shower curtain and curtain hangers (make sure they are the right size for your curtain rod!).

Typically the soul of the cornice or provide brackets … Click here to read more

]]> One of the easiest shower remodeling projects to upgrade existing shower curtain or door. Installing a new shower curtain is a fairly simple and can be done by anyone. To further enhance the look of your bathroom you can also consider adding (or upgrading) shower doors.

Shower Curtains – Install shower curtain rod and another simple DIY home repair project. If you currently do not have a shower curtain or if you replace the existing shower curtain rod measure the distance between the walls at a height where the rod will be placed. Home Repair Centers as well as a large number of department stores usually have enough selection to choose from. Select the correct length of the rod along with the selected style shower curtain and curtain hangers (make sure they are the right size for your curtain rod!).

Typically the soul of the cornice or provide brackets for you to install (if you have a laser level it is useful here) will be a spring or a telescope and tighten to the desired length. Set the rod level in accordance with instructions for the specific rod you have selected. Note: If the curtain hangers chosen not open do not forget to put them on the rod before installing it.

Shower doors – Installing shower doors a little more involved project but it is not too difficult for the average DIY Handyman home repair. The project begins again with the measurements – to measure both the top and bottom of the opening of the shower – depending on your tub / tile these measurements may not be the same so make sure you write them both. Your bathroom plumbing or home supermarket should have a choice of garage doors to choose from. They typically range in price from about $ 60 to $ 200 depending on the style you choose.

Although each specific door will have its own set of commands the foundations will still be the same. You will be installing a set of side rails bottom rail / Splash plate and top management to the door Hold on. Usually only the rails side will actually be attached to the walls. Like many other similar projects the actual installation is quite simple once training was completed.

Before installation make sure you have any special tools. Usually you only need to drill (with a ceramic tile bit if necessary) with small teeth hacksaw blades screwdrivers tape measure and caulk (usually a clear silicon caulk the bathroom). Pay special attention to your specific instructions and actions before abruptly each piece lengthwise. Also make sure that the dry Fit (no pun) pieces before the commencement of those attached to the wall.

Once you have all the pieces cut to length and all necessary holes drilled experimental setup is usually quite simple. Attach the pieces in the manner provided in the manual and make sure that everything looks / works OK before I do so waterproof tracing inside gaps.

On average this project should only take an hour or two of your time and can be accomplished with minimal difficulty. This is one soul remodeling project which is worth the time. You will be surprised how your bathroom is to improve the appearance by this simple change.

Watch the video related to DIY Home Repair

Replace cracked tile floor tiles using a grout scraper, pry bar, hammer and safety glasses. Learn how to replace cracked floor tileusing the home repair tips in this free video. Expert: Ryan Parker Contact: www.ParkerHomeRenovations.com Bio: Ryan Parker is the owner of Parker Home Renovations in New Braunfels, Texas. Filmmaker: Todd Green

Help answer the question about DIY Home Repair

Will Roto Rooter make a house call for clogged arteries ?
I just ate a Double Whopper with everything on it !

WTF
Home & Garden > Do It Yourself (DIY)
Home & Garden > Maintenance & Repairs
Education & Reference > Words & Wordplay
Business & Finance > Renting & Real Estate

Related Post

]]> http://www.su-casa.org/garage-door-repair.html/feed 18 DIY Home Improvement at the Tip of Your Busy Fingers http://www.su-casa.org/diy-home-improvement-at-the-tip-of-your-busy-fingers.html http://www.su-casa.org/diy-home-improvement-at-the-tip-of-your-busy-fingers.html#comments Thu, 16 Apr 2009 09:36:24 +0000 SuCasa http://www.su-casa.org/?p=31 Do it yourself projects should be doable, easy and ultimately useful. The following are some practical DIY tasks that you can try if you have free time at home.

Wiring a plug

Wiring a plug only requires basic know-how to carry out. First off, why would it be necessary to wire a plug? Sometimes, appliances’ plugs become brittle, and break. It is dangerous to use broken plugs. Broken plugs can result in electrocution and in some rare instances, death.

In some cases, the wires inside the plug becomes disconnected. The first thing to do is to unplug the device to be repaired from the power source. With a screw driver, remove the cover of the plug and proceed to clear the terminals of any dirt.

This applies to new plugs. The only difference would be the insides of new plugs are clean. Proceed to separate the three distinct wires. The … Click here to read more

]]> Do it yourself projects should be doable, easy and ultimately useful. The following are some practical DIY tasks that you can try if you have free time at home.

Wiring a plug

Wiring a plug only requires basic know-how to carry out. First off, why would it be necessary to wire a plug? Sometimes, appliances’ plugs become brittle, and break. It is dangerous to use broken plugs. Broken plugs can result in electrocution and in some rare instances, death.

In some cases, the wires inside the plug becomes disconnected. The first thing to do is to unplug the device to be repaired from the power source. With a screw driver, remove the cover of the plug and proceed to clear the terminals of any dirt.

This applies to new plugs. The only difference would be the insides of new plugs are clean. Proceed to separate the three distinct wires. The neutral wire, the earth wire and the live wire. All three are important, don’t leave anything behind.

Attach the three distinct wires to the proper terminals inside the plug.  Most plugs are uniformly built, so you won’t have any trouble carrying this step out.

The brown wire, which is the live wire should go to the portion of the plug marked “L”. The neutral wire, which is often coated with blue plastic should go to the “N” terminal. The third wire, the earth wire goes to the topmost region of the plug.

The copper wires should be wound around the proper terminals, or they should at least pass through. Some plugs require wounding while others do not.

Be careful with the fine strands of copper wire. Any loose strands should be fixed. Remember, loose strands can cause fire from shorts once you plug in the appliance.

Fixing a leaking faucet

You do not need a plumber to fix a leaking faucet. Often, leaking faucets can easily be remedied with the right tools. The first step to fixing a leaking faucet would be to turn off the water valve.
Leaky faucets are often due to brittle or broken rubber washers. These rubber washers are simple enough to be installed by anyone. Unscrew the top of the faucet after the water supply has been turned off.

Remove the broken washer and inspect the area. Clean the top portion of the washer of any kind of dirt. Molds should be removed with a clean sponge.

Place the washer and proceed to re-install the handle of the faucet. If all goes well, you would be able to screw the handle quickly. If the washer’s size is right, the leaks would no longer appear. Turn off the water supply once again and test. A clean stream of water should appear.

In case this approach does not work, there is a possibility that there might be cracks or fissures on the faucet itself. Turn off the water supply once again, and inspect the faucet for minute cracks.

If there are minute cracks, purchase generic sealants. The sealants do not have to be expensive. Sealants like Epoxy Steel can be used.

Watch the video related to DIY Home Repair

Get DIY home repair tips on how to perform basic sprinkler system repair and maintenance, and how to troubleshoot sprinkler system problems, in thisfree online home improvement video. Expert: Greg Lim Bio: Greg Lim is a professional handyman and residential property manager. In the seven years hes been a contractor, he has fully renovated two houses.

Help answer the question about DIY Home Repair

Can you pull permits after repair work has been done on a home?
I am a DIY'er replacing plumbing, electrical, heating ducts, and then drywalling to finish my basement. I want to have someone more qualified inspect the work I've done before drywall is hung. What is the process of getting a city inspector to view the work?

Related Post

]]> http://www.su-casa.org/diy-home-improvement-at-the-tip-of-your-busy-fingers.html/feed 16 Tackling A Diy Plumbing Repair http://www.su-casa.org/tackling-a-diy-plumbing-repair.html http://www.su-casa.org/tackling-a-diy-plumbing-repair.html#comments Wed, 07 Jan 2009 09:36:15 +0000 SuCasa http://www.su-casa.org/?p=28 When it comes to a plumbing repair, you have two ways to go – calling in a professional plumber to take on the job or tackling it yourself with a DIY plumbing repair. Taking on a plumbing repair yourself can save you quite a bit of money but you have to have the time and tools to complete the repair successfully.

When venturing into the world of do-it-yourself plumbing repairs it’s best to take it slowly. Begin with smaller projects such as simple installs and relatively easy repairs such as fixing a leak, replacing a valve, or insulating a pipe.

However, completing a plumbing repair successfully requires some fundamental knowledge and a comprehensive tool kit that will ensure your preparedness in any situation. Some basic tools to include in your plumbing repair kit are the basic varieties of wrenches, caulk, tape, nuts and bolts, and other basic household tools … Click here to read more

]]> When it comes to a plumbing repair, you have two ways to go – calling in a professional plumber to take on the job or tackling it yourself with a DIY plumbing repair. Taking on a plumbing repair yourself can save you quite a bit of money but you have to have the time and tools to complete the repair successfully.

When venturing into the world of do-it-yourself plumbing repairs it’s best to take it slowly. Begin with smaller projects such as simple installs and relatively easy repairs such as fixing a leak, replacing a valve, or insulating a pipe.

However, completing a plumbing repair successfully requires some fundamental knowledge and a comprehensive tool kit that will ensure your preparedness in any situation. Some basic tools to include in your plumbing repair kit are the basic varieties of wrenches, caulk, tape, nuts and bolts, and other basic household tools that you would use for any project.

Additionally, be sure to include a flashlight – with extra batteries – as part of your plumbing repair tool kit. Attending to a plumbing repair project often requires you to work in a dimly lit environment. A flashlight will ensure that you have all the necessary light in your workspace.

In addition to your plumbing repair tool kit, you should also arm yourself with as much information as possible. Go online to learn step-by-step instructions for any do-it-yourself plumbing repair project. You can also visit your local home improvement store for the latest resources on plumbing repairs.

No matter what, you should always be sure to stay within your comfort zone. If you feel like a plumbing repair project is out of your league, do not hesitate to call in a professional plumber. Tackling a project that you are not prepared to handle will only cost you time and money in the long run.

But if you are successful in your plumbing repair you will have the added satisfaction of a job well done as well as cash saved in your pocket.

Watch the video related to DIY Home Repair

Learn the basics of how to fix a hole in drywall or sheetrock from a home repair professional in this free online DIY home improvement video. Expert: Greg Lim Bio: Greg Lim is a professional handyman and residential property manager. In the seven years hes been a contractor, he has fully renovated two houses.

Help answer the question about DIY Home Repair

Can Kool Decking around the pool be done via do-it-yourself project?
Is it difficult (scale 1 -10)?

We are not novices at DIY home repairs however our knowledge stops at the interior projects (painting, carpet, tile, light carpentry, etc).

Would it be worth trying ourselve or getting an expert to do it?

Related Post

]]> http://www.su-casa.org/tackling-a-diy-plumbing-repair.html/feed 18